Easy Home Humidifier Mist Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement mist lid for the Easy Home and possibly Crane ultrasonic humidifiers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Replacement mist lid. Humidifier is ultrasonic and does not produce heat. PLA should be fine to use for the part. It will require supports. Suggest using a PETG interface layer to easy removal. The inner ring/lip is somewhat small and care needs to be taken with support removal to make sure it does not crack. This lid is somewhat of a press fit on the two units we have. It can be rotated but doesn't move as freely as the original. This was by design as our last one was bumped by a pet and the lid easily fell off which then became a chew toy. This interface with the humidifier top is similar to the original with an inner and outer ring arrangement that seals well and allows drops to fall back into the inner ring of the humidifier top without leaking.