Delta Smart Effector Dual 40mm Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 5/2/2019: The Delta Smart Effector has a new revision 2.0 which has moved some of the connectors at the bottom…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 734
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update 5/2/2019: The Delta Smart Effector has a new revision 2.0 which has moved some of the connectors at the bottom of the effector. This design WILL NOT FIT. Working on a revised model and will release it as soon as available.
I love the Delta Smart Effector but the 30mm 24V E3D fan noise was driving me nuts. I remixed the Delta Smart Effector Circular fan (270) to add an adapter for a 40mm heat sink fan.
Heads up; there's extremely little room under the Delta Effector and it takes some maneuvering to fit this under there (kinda work your way around the hotend).
It's currently running on my Delta and it's only a fraction of the sound from before, but I haven't put it through long term tests yet. I know the cooling fan works (I've been using it for over 400 hours) but whether enough air passes past the heatsink only time will tell.
Print Settings
Printer:
C3Dt/cXY
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Category: 3D Printer Parts