1 / 2
Custom Ventilated Lid for Lifegard Aquatics 5G Bookshelf Aquarium — zdjęcie 1
1 / 2

Custom Ventilated Lid for Lifegard Aquatics 5G Bookshelf Aquarium

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D-printed lid solution designed for the unique dimensions of the Lifegard Aquatics 5 Gallon bookshelf Aquarium.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
113
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

The Lifegard Aquatics 5 Gallon Bookshelf Aquarium (15.74"×7.87"×9.84") is great for nano-scaping. This 3D-printable lid is designed to solve the common frustrations of the typical glass lid by addressing cable management and gas exchange.

Key Features:

  • Hardware-Ready: Includes a dedicated cutout for Hang-on-Back (HOB) filters, Lily pipes, and various cables, keeping your rim look clean.

  • Universal Light Mount: The center cutout is designed to accommodate almost any gooseneck-style light. It has been tested and perfectly fits the Fluval Nano Plant 4.0.

  • Enhanced Ventilation: The mesh-style print allows for superior oxygen exchange and heat dissipation, which is vital for maintaining stable parameters in a 5-gallon system.

Print Instructions: 

To achieve the open-mesh "hex" look, you have to configure the model in your slicer by removing the top and bottom layers. 

  • Sizing: Use the "PreCut" file for medium format printers (ie MK4(S), CoreOne, Etc)

  • Shell Settings: Set Top and Bottom layers to 0.

  • Perimeters: Use 3–4 perimeters to ensure the frame remains rigid.

  • Infill: Set to 15%. I highly recommend Honeycomb for its structural integrity and aesthetic.

  • Reinforcement: Use Infill Modifiers around the handle attachment points to increase density for added durability.

  • Filament Choice: PETG or ASA is recommended. These materials handle the humidity and the heat from lights like the Fluval Nano much better than PLA.

Note: Be sure to print two lid handles. They can be secured with almost any glue. 

Required Hardware

  • 5mm Lid Clips: This lid is designed to rest on standard 5mm glass lid clips.

  • Note: These typically come with the Lifegard aquarium, but can be purchased separately on Amazon if needed.

Step File has been added for convenience. 

Tagi