C3Dt c Cantilever Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: it's been pointed out that the Y axis adapter and X axis extruder connector had 15x20mm spacing, most MGN12…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Update: it's been pointed out that the Y axis adapter and X axis extruder connector had 15x20mm spacing, most MGN12 rails have 20x20mm spacing. I've added Linear AdapterExtruderAssembly.stl and LinearAdapterYAxis both with the mgn12 20x20mm hole spacing.
These are the STL files that go along with the instructable 3D PRINTER CANTILEVER 2.0 C3DT/C
https://www.instructables.com/id/3D-Printer-Cantilever-20-C3Dtc/
Should you go ahead and take a stab at this one, I'd really appreciate some TIP DESIGNER engagement (or if you want to see more like this coming, support me on patreon at https://www.patreon.com/Core3d_tech)
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm-0.35mm
Infill:
15%
Notes:
The All Axis.STL should be printed with supports. The other STL files do not need supports.
How I Designed This
Category: 3D Printers