Vitali Lightweight Carriage Cartographer V4 PCB Guard/Poop Plow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cartographer V4 PCB Guard doubles as a Poop Plow for my AFC/Box Turtle. Mounts to Vitali3d lightweight carriage.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Cartographer V4 PCB Guard/Poop Plow for my AFC/Box Turtle. I didn't want my 'poops' from my AFC Poop macro sticking to the Carto V4, so I made this. It mounts to the Vitali3D Lightweight Carriage here:
https://vitalii3d.com/products/super-lightweight-carriage-for-voron-printers-1
I'm using an A4T w Dragon ACE/Wristwatch BMG combo tool head and I had to use the 7.5mm spaces to place my Carto V4 at 2.8mm offset from nozzle, so this model places the lower part of the plow just below the bottom of the PCB. I've included the step file if there is a need to shorten/lengthen the plow.
Print in your desired orientation, typical Voron print settings. I've printed logo side down as well as top side down and both prints came out just fine. Uses M3x18mm I can't remember which for mounting.
