Chaotic Labs CNC Tap V2 AFC Poop Plow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AFC Poop Plow that friction mounts the the screws that extend out the back of the CNC Tap. Coupled with A4T Toolhead
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Poop Plow for my toolhead and AFC/Box Turtle setup. I didn't want my 'poops' from my AFC Poop macro sticking to the nozzle so I made this. It mounts to the back of the Chaotic Labs CNC TAP via friction mount. The holes are just big enough to push onto the back of the M3 screws that extend through the TAP mount.
I'm using an A4T w Dragon ACE/Wristwatch BMG combo tool head, so this model places the lower part of the plow just a bit above the bottom nozzle. I've included the step file if there is a need to shorten/lengthen the plow.
Print logo side up, typical Voron print settings.
