Fantasy Armor - Helm of the Isshurument
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Helm of the Isshurument. From the graphic novel 'Deverish Also' This is a wearable design with a pivoting visor. I…
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1043
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Helm of the Isshurument. From the graphic novel 'Deverish Also'
This is a wearable design with a pivoting visor. I designed it to fit my lager than average head, so you will probably want to scale the files down a bit to better fir your head.
Print Settings
Printer Brand:
Solidoodle
Printer:
Solidoodle 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3 or higher
Infill:
20% or more
Notes:
Layer height is dependent on how much finishing work you want to do. Print with 3 perimeters and 20% or more infill for strength.
If you want to print it full size, you will need to cut up the model with netfabb to fit in most printers, and play with orientation to minimize supports.
Post-Printing
You will need to drill holes through the side of the helm and shallow holes in the visor and fit bolt for the visor to pivot. There are pilot holes in the files to use as guides.
Category: Costume