Kobra S1 Vented LED Riser with External Power
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beefy vented riser with a groove for an LED strip and optional corners to wire how you like (or not at all).
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1000
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Ι wanted:
A vented riser so I can print with the door closed and not fuss with the lid
The ability to have the ACE on top without being too tall (because I’m a shorty)
The ability to add LEDs with an external power switch
To match the riser on my Elegoo as closely as possible
I used the Sturdy Riser by 3D-Druckbude on my Elegoo heavily for inspiration but since the Kobra S1 top and lid are 100% different from the Centauri Carbon, I had to start from scratch.
About 3 weeks of designing, testing, and tweaking later, I think it's perfect. :)
I've included a PDF with more details, parts/hardware, assembly, and wiring instructions. The LED groove is 10mm tall and the slider knobs can be tightened to prevent rattling.
UPDATE: It's a bit awkward to reach the slider knob on the back with the printer against the wall so I'm gonna work on a solution for that. I'll add it to this post when it's ready. A "long knob" has been added to the optional files folder to make it easier.