1 / 1
Replica of Grenadier Dwellers Below 2012A Miniature — zdjęcie 1

Replica of Grenadier Dwellers Below 2012A Miniature

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replica of figure A from the box "Dwellers Below", number 2012 from Grenadier (see…

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
116
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
People
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replica of figure A from the box "Dwellers Below", number 2012 from Grenadier

(see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2012.jpg )

Reproduced using https://www.thingiverse.com/thing:1762299

The Rust Monster first appeared in (Orignal) Dungeons and Dragons Supplement I: Greyhawk in 1975. It was based on a small plastic toy that Gary Gygax found in a bag of small plastic monsters made in Hong Kong.

In the original box, the Rust Monster arrived as a 2-piece model that required assembly. I did not disassemble my original in order to scan it.

This model was a pain to generate. The original is poorly weighted, so it always leans back on its tail. This created a hole in the bottom of the tail when I scanned it, which I had to fill in. It also meant that I couldn't use the base of the scan to coincide with the build plate, so I had to do a lot of work on the bottom of the model as well. The result is a model that stands on its feet better than the original.

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Ultimate

Rafts:

No

Supports:

Yes

Resolution:

0.1mm

Infill:

25%

Filament: eryone PLA white


Notes:

I printed mine at 145%, which is a bit larger than the original.
Try 140% to match the original.

Set Z = -1 mm

If you use supports, be careful when removing them. The bottom part of the tail of my model came off with the support material and I had to glue it back on.

Category: Scans & Replicas

Tagi