Logitech Brio 101 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
To use this you'll need to remove the stock mount. Behind the webcam, on the hinge, you can remove a couple rubber stoppers to expose a screw which can be removed. Push out the plastic plug, keeping the screw and plug. The printed part replaces the stock mount, just assemble the part in reverse order.
Here's a link to the camera store page on Amazon: https://www.amazon.com/Logitech-Webcam-Meetings-Streaming-Built/dp/B0BXGFFSL1?th=1
Mount to the aluminum extrusion using a M3x8 SHCS and a M3 hammer head T-Nut or similar method.
It's probably a good idea to print with a material that is somewhat heat resistant if installing inside an enclosed chamber.