Core One / + / L Exhaust Fan Cable Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan surround keeps the cable umbilical from being caught or snagged on the exhaust fans of the Core One/+/L
- Ocena
- 4,875 / 5
- Polubienia
- 56
- Pobrania
- 185
- Wydruki
- 7
- Wyświetlenia
- 876
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
This model is a surround that is installed so that the umbilical and PTFE tube can no longer be caught in the exhaust fans. I found this to be an issue especially with models that take up a large portion of the print bed, especially those that use the rear portions and was the cause of some layer shift issues. This modification can be installed without any tools or disassembly required. Just simply flex the part over the fans and it will snap into place, and removal is similarly simple.
Due to being inside the printer, it is highly suggested to use PETG at a minimum for temperature resistance. Tested and installed on Core One / + and Core One L using Prusament PETG, support is required on the middle pieces.