Small Card Tray for Square Cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I originally intended this for the game "Card Rogue" (http://www.cardrogue.com/), but left the dimensions loose enough…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
I originally intended this for the game "Card Rogue" (http://www.cardrogue.com/), but left the dimensions loose enough that other ~2 inch (50-54mm) square cards would work fine with it. It's not fancy, but it works well.
For Card Rogue, you need two of these.
Attribution
I used:
- the "roundedRect" OpenSCAD module by WilliamAAdams
I've attributed him also in the included source code for the part.
Print Settings
Printer:
MendelMax 1.5
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Notes:
Nothing fancy needed to print, just a large (8"/200mm) bed.
Designed in OpenSCAD.
Category: Toy & Game Accessories