Better lightsaber for TP holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bit more complex model for building blocks figure toilet papaer holder. I wanted something more simmilar to real part.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided to improve the lightsaber for LEGO-like toilet paper holders.
IMPORTANT - you will need to glue the figure hands as shown on the CAD picture (facing outwards)
Bill of Materials
1x set of printed parts
1x M3x14 screw and heatinsert (optional if you want to change wielding hand)
glue
Print Settings
Just regular print settings. I used:
PLA
0.25 mm layer height
2 walls
15% infill
support disabled
You will need to orient the prints correctly on the print bed.
Assembly
Glue together hilt_1 and hilt_2, glue together pin and blade. Either put voron heatinsert into hilt_3 or put glued hilt_1 and hilt_2 into figure hand and glue the whole hilt together.
__________________________________________
TODO
pictures of the printed parts
make it use anything between M3x10 and M3x20 screw
upload 3mf files with correctly placed parts
Changelog
27.01.2026 - public release