Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a cupholder for my 206cc after I found out that this car has only two "holders" for espresso cups while you park.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this cupholder after I found out the "cupholders" in my Peugeot 206cc are big enough for espresso cups but not for bigger thermo cups one usually uses. Also the integrated cup...stands are merely dents in the inside of the glove compartment, not suitable when you drive.
So, I created a simple holder made from PETG and tough resin you can screw to the side of the dashboard with two little selftapping screws. You can open the glove compartment lid even with the cup in the holder. I tested the holder also on a VW Golf MK4 and it fit too.
You should also use either PETG or a filament that can withstand the temperatures in a car. I had a black 206cc and PETG worked great for me.