Crawling Zombie Over Victim – Support-Free Dioram
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single-piece zombie diorama: an intact crawler on top of a body, set on a cracked concrete/rubble base. Designed for F
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you’re browsing this model… drop a Like — this one’s meant to look brutal on the shelf 😄
Zombie Overkill Crawl – No Supports / Easy Mode
A one-piece diorama of an intact zombie crawling over a lifeless body on a cracked concrete/rubble slab. Built specifically to be support-free on FDM printers, with chunky, print-friendly detail and a perfectly flat underside for reliable bed adhesion.
Printability first ✅
Supports: NO (Easy Mode)
Single piece: yes
Flat base: yes (stable + strong adhesion)
Best use: desk/shelf horror prop, Halloween display, gamer setup décor
Recommended settings (PLA)
Fast + still looks great
Layer height: 0.16
Walls: 3
Infill: 10–12% Gyroid
Top/Bottom: 5 / 5
Brim: 6–8 mm (recommended)
Premium detail
Layer height: 0.12
Walls: 3 (or 4 if you want it extra tough)
Infill: 12–15% Gyroid
Top/Bottom: 6 / 6
Brim: 8–10 mm
Scaling
Print at 100% as uploaded, or scale up for more detail:
120–160 mm overall length is the sweet spot for display.
If you scale up big, consider 4 walls for strength.
Filament ideas
Matte Grey / Stone Grey = “statue” look (super clean)
Green + Denim Blue = classic zombie vibe
Paint-friendly if you want to weather the rubble and add gore.
If you print it, post a Make — I want to see your paint jobs. 🧟♂🧱