RadMission Rear Rack Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are side and deck panels that I designed for the RadMission Rear Rack.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
These are side and deck panels that I designed for the RadMission Rear Rack.
I used laser cut plywood but these can be cut from just about any sheet material. I've included SVG, STL, and SCAD files.
I secured the side panels using 8mm and 16mm rubber cushioned pipe clamps and 12mm M5 machine screws, nuts, and washers.
The deck was secured with 20mm M5 taper head machine screws and nuts.
There's two versions of the deck, one with holes for mounting 7 and 13 slot picatinny rails to the deck if you feel the need for a tactical bike rack.
Category: Sport & Outdoors