FaZe Clan 3D Keychain – Easy Multi-Color (Layer Swap)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleek FaZe Clan keychain optimized for layer swaps. Tested on Prusa XL/Core One/MK4S for perfect multi-color results.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FaZe Clan 3D Keychain – Easy Multi-Color (Layer Swap)
Represent the lifestyle with this sleek, 3D-profile FaZe Clan keychain. Designed with precision and ease of printing in mind, this model uses simple manual layer changes or slicer-based color swaps, meaning you don’t need an MMU or Toolchanger to get that iconic red, white, and black look.
The logo is recessed and layered to give it a high-end, tactile feel that holds up on a set of keys.
🛠 Tested & Proven
This model has been rigorously tested for fit and finish on the latest Prusa hardware to ensure perfect tolerances:
Prusa XL
Prusa Core One
Prusa MK4S
📏 Print Settings
Layer Height: Optimized for 0.1mm (detail) or 0.2mm (speed).
Infill: 15-20% Grid or Gyroid.
Walls: 3 perimeters for extra durability around the keyring hole.
Material: PLA or PETG (PETG recommended for heat resistance).
🎨 How to Color Swap
No multi-material unit? No problem. Simply set your layer changes in PrusaSlicer at the following heights (assuming a 0.2mm first layer):
Base Color (Black): Start here.
Logo Outline (Red): Set a change at the first layer of the logo border.
Logo Face (White): Set a change for the final top layers of the logo.