Wheelie bin hinge ⌀19.5x50mm ⌀33x3mm cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheelie / Trash bin / container hinge / plug 3D-print Dimensions: ⌀19.5x50mm ⌀33x3mm cap .STL, .3MF Included
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Printed with:
Creality Ender 5 S1 + Sonic Pad, 0.6mm Nozzle, PLA, 0.4mm Layer height, 50% Gyroid infill, 2 walls, Tree support. Slicer print time: 57 minutes. Print time: 39 minutes. ~5M of PLA = ~15gr = ~€0.30 worth of filament.
Recommended materials:
If available use ASA, PETG or PC as they are more resistant to UV and are better suited for the outside. Materials like PLA (which I used) or ABS variants can work as well, but may wear down or break easier.
Recommended settings:
Layer height: 0.4mm or smaller for smoother finishes
Infill: 50% or more, I like to use Gyroid
Walls: 2 or more
Angle the object (hinge) slightly and use tree supports for more strength, also (automatically) enable brim to avoid warping