1 / 9
Tool Organizer — zdjęcie 1
1 / 9

Tool Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bring order to your workshop with this hexagonal organizer featuring a modern and functional design.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
1
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Bring order to your workshop with this hexagonal organizer featuring a modern and functional design. Perfect for screwdrivers, brushes, and technical accessories, this model combines aesthetics with smart engineering.

The Technical Twist: The cap's locking system is specifically designed to leverage 3D printing mechanics. Once inserted, a slight rotation allows the internal linear seam to create the friction necessary to lock the components (Twist-lock). The fit is so secure that you can lift the entire loaded kit just by holding the cap!

Key Features:

·         Rotating Base Support: Enables smooth and comfortable rotation, allowing for quick identification and easy access to the tool you need.

·         Easter Egg / Secret Compartment: The cap is designed with a cavity, allowing for a hidden "Easter Egg" inside the Hex that can only be removed after opening the Smart Friction Lock Cap! Use it to hide a small surprise, a special spare part, or a rolled-up banknote. It’s the perfect place to keep small items you don’t want left out on your desk.

·         Smart Closure: The Smart Friction Lock Cap slides in easily and, with a slight turn, uses the 3D print’s internal seam to lock into position via friction. This prevents any accidental slipping.

·         Double-Sided Holder: Features a perforated layout on one side and a raised bottom on the other for a specific symmetrical compartment.

Recommended Print Settings:

·         Material: PLA or PETG

·         Layer Height: 0.2 / 0.24 mm

·         Walls: 4 (Important for the strength of the locking mechanism)

·         Seam: Set to "Aligned" – Avoid "Random" seams to ensure the friction-lock effect works correctly.

·         Infill: 15% - 20% - 25% for the main body.

·         Supports: Tree supports for the Cap & Double-Sided Holder.

If you like this design, please upload a photo of your print! I would love to see how you use it in your workshop.

Tagi