1 / 2
Feathers Mcgraw Girl With the Pearl Earring — zdjęcie 1
1 / 2

Feathers Mcgraw Girl With the Pearl Earring

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feathers Mcgraw Girl With the Pearl Earring

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Project: Feather McGraw Earring 2.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 196.41x240mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 3mm and the Actual Thickness is 2.76mm

#555b46 PLA+ Esun Olive Green Transmission Distance: 0.3

#565d65 PLA+ Sunlu Grey Transmission Distance: 2

#3e5468 PLA ESun Silver Transmission Distance: 0.6

#45c8d6 PLA Elegoo Sky Blue Transmission Distance: 1.8

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

#000005 PLA Elegoo Matte Black Transmission Distance: 0.5

#bf2b2b PLA Prusament Lipstick Red Transmission Distance: 3.9

#b15533 PLA BambuLab Matte Terracotta Transmission Distance: 1

#ffdc8e PLA Geeetech Silk Gold Transmission Distance: 0.7

#ff6f22 PLA Sunlu Sunny Orange Transmission Distance: 6.5

#d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2

#7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2

This print uses 12 unique filaments

Swap Instructions:

Start with Olive Green

At layer #14 (0.68mm) swap to Grey

At layer #18 (0.84mm) swap to Silver

At layer #25 (1.12mm) swap to Sky Blue

At layer #26 (1.16mm) swap to Jade White

At layer #28 (1.24mm) swap to Black

At layer #33 (1.44mm) swap to Grey

At layer #38 (1.64mm) swap to Lipstick Red

At layer #44 (1.88mm) swap to Terracotta

At layer #48 (2.04mm) swap to Jade White

At layer #49 (2.08mm) swap to Gold

At layer #51 (2.16mm) swap to Sunny Orange

At layer #56 (2.36mm) swap to Latte Brown

At layer #61 (2.56mm) swap to Dark Brown for the rest.

Tagi