LEGO Star Wars ARC-170 Starfighter 75402 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
A wall mount for a LEGO Star Wars ARC-170 Starfighter 75402.
Wall Mount
Part List:
4 2780 LEGO pieces
2 m4 screws
2 8mm wall plugs
Instructions:
Insert the 4 2780 LEGO pieces into the black brackets on the back of the ARC-170 (See photos).
Attach the wall mount to a wall using wall plugs/ command strip etc.
Line up and attach the ARC-170 to the holes in the wall mount.
Done!
Wall Mount and Adapter
Part List:
4 2780 LEGO pieces
2 m4 screws
2 m4x30 machine screws
2 m4 nuts
2 8mm wall plugs
Instructions:
Print the parts
When printing wall adapter, assuming a 0.2mm height, pause the print at layer 112 to insert the captive m4 nuts.
Attach the wall mount to the wall adapter using the machine screws.
Insert the 4 2780 LEGO pieces into the black brackets on the back of the ARC-170 (See photos).
Attach the wall mount to a wall using wall plugs/ command strip etc.
Line up and attach the ARC-170 to the holes in the wall mount.
Done!
10/01/2026 V1: Created Wall mount.
26/01/2026 V2: Adjust the size of part to better fit the model. Made clipping points have a range so the ARC foils can be in either position while on the wall.
17/02/2026 V2.1: Added a 45 degree wall adapter. Made the wall mount holes larger for better alignment.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament: Filamentive PLA Black Category: Decor