Lindy HF-100 Speaker holder replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part to Lindy HF-100 (and probably HF-110) headphones. The plastic part that attaches the speakers to the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Replacement part to Lindy HF-100 (and probably HF-110) headphones.
The plastic part that attaches the speakers to the metal headband broke on my headphones. Here's the replacement I made.
Snaps neatly over speaker into original holes.
Has the same constraint on maximum speaker-angle as original part.
Attached to original original metal headband with a 12mm M5 countersunk bolt and M5 nut.
The nubs that attach to speaker requires supports on build plate.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Add north PETG Glitz grey
Notes:
Should work in any material, but requires a little bit of flex when installing.
Category: Audio