Core One – Internal Print Sheet Holder / Storage Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Internal storage for up to 3 print sheets inside the print chamber
- Ocena
- 4 / 5
- Polubienia
- 23
- Pobrania
- 40
- Wydruki
- 2
- Wyświetlenia
- 577
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Insert your build plates directly into the print chamber!
This upgrade does not interfere with the Z-axis movement and does not reduce the available print volume.
Installation is very simple: just loosen the Z-motor screws by a few millimeters and add an M3x5rt (or M3x8rt) screw using the spare hardware included with the printer.
Features:
No Z-axis interference
No loss of print volume
Holds up to 3 build plates
Uses only stock screws
2-minute installation
The part was printed in PC-CF with 4 perimeters to ensure high rigidity and thermal stability inside the chamber.
Parts needed
3× M3x5rt (or M3x8rt) screws (from the spare parts kit)