Cover for Lutron Maestro Motion Sensor Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple cover for a Lutron Maestro Motion Sensor Switch
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I've been running my 3D printer in an unused bathroom sometimes to reduce fume exposure. This bathroom happens to have a motion sensor switch that keeps triggering from the movement of the 3D printer. Thus this 3D printed part was conceived to fix a problem caused by 3D printing.
This simple cover was designed to work with the Lutron Maestro Motion Sensor Switch. Originally I thought gluing a magnet in the rear hole would help hold it in place, but it turns out the magnet caused the whole cover to be too bottom heavy. Now the cover sits on the motion sensor and that seems to be good enough for temporary use. If you want a more permanent solution you should probably just replace the switch.
I printed this without supports on my MK4S using PLA