Mini Screwdriver Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle designed to accept 1/4 inch (6mm) screwdriver bit extensions.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This handle is designed to accept a 1/4 inch magnetic screwdriver bit holder. It is a very tight, permanent press fit. You can install the bit into the handle by pressing it with a vise or by using a rubber mallet to hammer it in.
I designed this handle as a means of inexpensively giving someone a screwdriver if they needed to borrow one, or if they required the use of specialty bits.
The handle was designed to be very small on purpose. It makes an excellent stubby screwdriver for getting into tight spaces and the small handle limits the amount of torque you can apply by hand so you are unlikely to over tighten screws or strip out the inserted bit holder.
The bit holders can be purchased very cheaply on Amazon. https://amzn.to/3Z2jMPw