G-Shock NATO Strap Adapter (GW6900)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pice to connect a 24mm NATO strap to some G-Shock watches (GW6900)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- GNU General Public License v3.0
A adapter to replace the resin adapter that connects a NATO cloth strap to the body of a GW6900 G-Shock watch.
I made this because the other models that I found broke after some time, and I wanted to make a larger version in CAD.
Size/Compatibly
It fits the GW6900, and 24mm NATO straps. Maybe it fits others watches, but I do not know.
The V1 version should fits "snug," which can cause it to break on the layer lines. The V2 version is larger on the band, but smaller with the spring that connects it to the watch.
The part should fit a NATO strap up to 24mm wide. The G-Shock should be up to 14mm wide where the spring holds the band in. The spring should be smaller than 2.6mm.
Print Settings
I printed with TPU, and 100% infill. Printed upright to allow for the ring that connect to the spring to be stronger, as such some supports are required. No supports are required for the arch, as the overhang is short. I painted arch to block supports.