Cosmetic bits for the Domochevsky M2R6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cosmetic bits for the Domochevsky M2R6
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cosmetic bits for the Domochevsky M2R6 - https://www.printables.com/model/1385301-x-shot-micro-20-reshell-6-mag-fed-variant-v12
Use M3 heatset inserts (5mm OD, 3.5 or 4mm depth)
NOTE - Some parts need to be mirrored in your slicer (since I'm too lazy to create two copies)
 | Muzzle is made up of the front that needs four M3 heatset inserts, the muzzle itself and two decorative bolts |
|---|
 | Grips, as well as the mid part with some decorative pattern |
|---|
 | Body has two heatset inserts each on both sides and some small bolt on greebles |
|---|
 | Two greebles for the middle section |
|---|
 | Barrel takes four heat set inserts, then spacers and two decorative plates |
|---|
 | I also designed a 3-finger trigger pull (in a folder in Files - needs a M3x30mm bolt and lock nut) |
|---|