Atari ST (520/1040) mean well RPD-60 bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to use a mean well PSU inside an Atari ST case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I just bought an old Atari 520st(fm) on eBay it was working but one of the capacitors on the 220v side was badly bulged.
Since i had a mean well PSU i bought to use as spare for my amiga 1200 and i already built one to use for my A500, i decided to use this one as replacement for the ST.
Warning: 220 volts live current can be potentially lethal!
DO NOT replace your PSU unless you know exactly what you are doing.
I will not be held responsible if you hurt yourself or damage your equipment.
use m3 brass insert to attach the PSU to the printed bracket ans the original screws to attach the bracket to the mounting plate inside the Atari, since i did not have the connector i de-soldered the connectors on the PSU and soldered the original cables from the Atari to the proper connection on the new power supply.
i also grounded the new PSU connecting the ground point under the PSU screw holes connecting them to the RF shield mounting screws .