Hangers for Headset/Headphone - monitor arm and underdesk. OpenSCAD file included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two headphone hangers: one hangs on a monitor stand rail, the other screws into the bottom of a shelf or desktop.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 2
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These hangers were designed for SteelSeries Artic Nova Pro wireless headsets, but probably work for most other headphones/headsets. If resizing is needed, the 80-or-so line OpenSCAD file is included for you to modify.
The rail version is hooked on an arm of one of my monitor stands.
The underdesk version is screwed into one of my wife's Ikea desks using wood screws.
The 3MF file has both versions, and shows how to orient them on the buildplate. It is not a different model. No supports or brim are needed.
I use 0.25mm layer height and a .4mm model and that works fine. Each hook weighs about an ounce (25g)