Subaru Rear-Middle Seatbelt Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable replacement for rear middle seatbelt holder in various 2009-2025 Subaru models.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I was tired of breaking the rear-middle seatbelt holder, sometimes referred to as a webbing belt holder or an upper quarter trim holder, (Part numbers 64728FG011JC, 64728FG010JC or 64728FG010JG) so I modelled my own in Blender 5.
Should fit:
Ascent ('19 to '26)
Crosstrek ('18 to '26)
Impreza ('17 to '26)
Outback ('09 and '10)
WRX ('09 to '14)
I've made the model slightly wider and chunkier than the original so hopefully it is more durable. I didn't bother adding the bump inside the buckle holder and just made the buckle tolerance tighter to prevent it from falling out.
There are two files. The main file includes CAD supports so that you don't need to fuss with them. Using a 0.2 layer height and 0.42 line width I found the supports very easy to remove. The no supports file is just the model itself.
Printed using ASA with a 0.4mm nozzle, 0.2mm layer height, 0.42mm line width.
