Smartphone heavy duty box - Redmagic 11 Pro version or No Logo version

This is a protective case for the Redmagic 11 Pro with print-in-place hinges and air vents, the smartphone could use the fan even inside the case. All you need to do is print, add M3 screws, nuts, and some foam, and your smartphone will be indestructible inside!

No Logo version:
This version hasn't the Redmagic logo and doesn't have the air vents, so this version is FOR ALL BRANDS <3. You can adad any logo in the slicer if you want, just dug your preferite logo for 0.68 mm into the face of the case.

Required material:
-4 x M3 30 mm screws
-2 x M3 35 mm screws
-6 x M3 nuts
-40x24 mm of rubber foam with 10 mm max thickness (> 10 mm the case will not close)

For the rubber foam: I suggest you to use elastic glues like Bostik to stick the foam to the case; strong double-sided tape could be used as well.

Usefull informations:
-I higly suggest you to print the "Hinges tolerance test" and choose your preferite tolerance. The hinges have tolerances between -0,32 and -0,40 mm. Print the test, choose your preferite tolerance and print the case with the same tolerance. Some hinges are stuck and others are too lose but 1 is perfect, it changes between every 3d printer.
-I printed this Stl with 0,12 mm layer height and 0,2 mm first layer height
-3 walls, 30% infill
-support [on].
-color change at: 8 layer / 0,80 height (with 0,2 mm 1st layer and 0,12 layers height)
-for the "carbon look" texture you can use a textured bed sheet.
-plastic used: Creality hyper black PLA, eSun bone PLA +
-if you don't like the Redmagic logo check my "no logo" edition.