Pipe Rosette for 1/2 inch copper pipe, pipe size adjustable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two piece pipe rosette that interconnects via puzzle tabs. There are two models, one with screw holes and one without.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
There are two versions here, set for 1/2 inch copper pipe. One without screw holes and one with screw holes. The screw hole version is more like something you'd pick up at HD, and set for a #6 screw. I probably would use a little silicone caulk on the non screw version to get it to hold in place. I'll probably use the non-screw version in the vanity in the pictures. These were created mostly by Claude.ai, with a lot of coaching from me. The code is openscad, parameterized and commented so its all easily identifiable and changeable. Just locate the parameter from the comments and descriptive variable name.