1 / 18
Isopod Millipede Feeder: Evil Stumps (Vol. 1) Creepy Trees Dead Roots — zdjęcie 1
1 / 18

Isopod Millipede Feeder: Evil Stumps (Vol. 1) Creepy Trees Dead Roots

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Functional creepy stumps for your terrariums. Or anywhere you may need an evil stump.

Ocena
0 / 5
Polubienia
5
Pobrania
31
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Turn your terrarium into a cursed woodland with this set of five unique, macabre tree stump hides. Originally born from a journey of designing functional boxes and coin holders, this collection has evolved into a series of "spooky and strange" habitats for the bioactive hobby. Each design features a wide-open mouth designed specifically as an isopod feeding station (you can add food). 

Or anywhere you need an evil stump.  The hollow ones make great pen holders. 

The Volume 1 Lineup

  1. The Screaming Elder: A classic face with a cavernous, howling mouth entrance.

  2. The Fanged Guardian: A jagged, aggressive stump with sharp teeth protecting the doorway.

  3. The Death Root: A skeletal human skull fused directly into the ancient, rotted timber.

  4. The Cursed Grove: A gnarled trunk with the faces of lost souls emerging from the bark.

  5. The One-Eyed Watcher: A cyclopean stump featuring a central eye and thorny, reaching branches.

Printing & Technical Specs

  • Scale: These models were test printed at 50% scale (approx. 2 inches/50mm) for a "mini-hide" or feeding station vibe. Scale to 100% for a full-sized terrarium centerpiece. 

  • There is also one printed at 25% in the photos, this one still turned out okay but a little too small for adult isopods. (just version 1 or the version with no teeth)

  • Material: PETG is strongly recommended. IF using in a terrarium. It provides superior stability in high-humidity (80%+) environments and will not degrade or warp over time like PLA.

  • Slicer Settings (OrcaSlicer/Flashforge):

    • Supports: Use Tree (Organic) supports.

    • Threshold Angle: Set to 1°. This ensures the printer only supports the internal "ceilings," leaving the high-detail exterior bark and faces clean and waste-free.

Note: these are some of the first 3d printer projects I have made, and new to 3d printing. Scaled to 50% the teeth are pretty fragile. I do not really know if I set the support correctly. Or if printing it at 100% would do better. Hopefully, but I do not need any that large. So, I added my slicer settings in case you get a massive support frame inside the mouth. I still had to carefully clip it out in two pieces.  Version 1, or the one with NO teeth does not need any support. Probably the best of the bunch. Also has the largest inside chamber.

Tagi