Perception Kayak Foam Seat Insert Lug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting lug to replace the easily broken, and hard to replace, lugs on older Perception Kayaks foam seat inserts
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Some older Perception kayaks (WW (e.g. some pirouette super sport) and Canoe Polo boats) came with foam seats that could be swapped out for a different size fit. The seats attached via a lug on each side that locks into a corresponding hole.
This model is a replacement for that part as I couldn't find any on-line to order.
It's one of my very first modelling attempts and so may have some rough edges, but it's worked well in one of my boats and a few of the local Canoe Polo clubs older boats :-)
I'd recommend PETG as it''s less brittle than PLA. Prints with 3 walls and 20% infill at 0.16/0.20 layer height haven't failed with 4 terms of school polo roster under their belt, so you may want to start there.
Print 1 reflected for a pair. Print orientation as suits your situation and chosen filament. Flat rather than the STL orientation is probably best.