Load Cell Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is (yet another) holder for the 50kg load cells commonly available. https://www.sparkfun.com/products/10245 The…
- Ocena
- 4,25 / 5
- Polubienia
- 44
- Pobrania
- 650
- Wydruki
- 6
- Wyświetlenia
- 3334
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is (yet another) holder for the 50kg load cells commonly available.
https://www.sparkfun.com/products/10245
The recess in the holder has been sized for a press-to-fit install of the load cell. Just snap it into place.
The internal space of the holder allows the inner plate to flex downwards with load: this is what you want, as it allows the strain gauges to work correctly.
You'll typically use 4 load cells to build a weight scale, along with some sort of differential amplifier and A/D conversion (E.g. HX711 chip).
The design is parameteric - and I've included the source if you wish to modify it.
Note: This is not OpenSCAD. It's a program written in Go. The main library and code examples can be found here:
https://github.com/deadsy/sdfx
About Go: https://golang.org/
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX v2
Rafts:
No
Supports:
No
Filament: Your Choice PLA
Category: Electronics