Deadpool & Woolverine Heart
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funny Hueforge of Deadpool & Woolverine
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Project: Deadpool & Wolverine.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
I have added a height range modifier to speed the print up slightly so the layer numbers are different but the mm are the same.
The Model is 112.54x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2mm
#ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5
#d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
#ff0000 PLA Anycubic Bright Red Transmission Distance: 5
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#b15533 PLA BambuLab Matte Terracotta Transmission Distance: 1
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#0041cc PLA+ Sunlu Blue Transmission Distance: 4
#2e4462 PLA Panchroma Matte Army Blue Transmission Distance: 0.1
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 10 unique filaments
Swap Instructions:
Start with Pure Yellow
At layer #13 (0.64mm) swap to Latte Brown
At layer #16 (0.76mm) swap to Brown
At layer #23 (1.04mm) swap to Bright Red
At layer #24 (1.08mm) swap to Maroon Red
At layer #27 (1.2mm) swap to Terracotta
At layer #31 (1.36mm) swap to Black
At layer #38 (1.64mm) swap to Blue
At layer #45 (1.92mm) swap to Army Blue
At layer #47 (2mm) swap to Jade White for the rest