1 / 1
Oil Cap for Predator Small Engines
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a knurled replacement oil cap for the Predator Series small Engines.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a knurled replacement oil cap for the Predator Series small Engines. It has the shoulder to accept the existing sealing ring.
I printed this in CC3D 72D TPU. It seems that the tolerance on the motor's threads are not the greatest, so on some on my oil caps, they threaded perfectly and some were a little loose. This is the fault of the motors threads, you can scale adjust accordingly if you would like, but they all still seal just fine.
Prints with no supports, I personally did 3 walls and 15% gyroid infill.