Creality CR-6 SE Tool Drawer Organizer Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Tool Drawer Organizer. This one accommodates some of the tools that did not fit the cutouts in other versions
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 176
- Wydruki
- 2
- Wyświetlenia
- 1105
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After reviewing several designs, I selected Kenny (iluvlamp07) Johnson's tool drawer organizer {https://www.thingiverse.com/thing:4665167} for my Creality CR-6 SE and printed it. But it turns out that a couple of the tools I received with my printer may be different from those included with others of the same model.
Most noticeably was the nozzle tool, which was slightly longer and thicker than the space in iluvlamp07's design. The Allen wrenches in their holder were also a bit wider than the space. in the original design.
It is not unusual for manufacturers to use multiple sources for parts, and I figure this is what happened.
So I made a quick remix of iluvlamp07's design. I will probably modify this design later, as the tool I use most often are the flush cutters, and will probably move them to the front of the drawer in my next iteration.
Print Settings
Printer:
Creality CR-6 SE
Rafts:
No
Supports:
No
Resolution:
. 20
Infill:
20 %
Filament: Inland PLA+ Neon Green
Notes:
Printed using a nozzle temperature of 205 and a bed temp of 60.
Category: 3D Printer Accessories