Fire Extinguishing Ball mount rotating clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to attach the plastic basket of an Automatic Fire Extinguishing Ball to the top rail of an Ender 3v2, or any…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Clip to attach the plastic basket of an Automatic Fire Extinguishing Ball to the top rail of an Ender 3v2, or any other 20x20mm extrusion.
Since the basket is a round, two rotating clips are printed in place to clip onto it. They are printed with supports in order to retain the most layer tenacity for the clip action.
Print twice to hold the basket on both sides.
Includes clearance for Customizable v-slot cover plus.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
40%
Filament: SUNLU PLA+ White
Notes:
Print Speed: 150mm/s
Infill Pattern: gyroid
Z Seam Alignment: sharpest corner
Enable Ironing: True
Post-Printing
Wiggle the rotating clips to free them.
If they are too stuck because of inner material adhesions, they can be force rotated just somewhat less than 90º to clip onto the basket. While this will apply strain and deformation to the stem, I've found it didn't break it.
How I Designed This
Designed in FreeCAD.
Iterated the profile_test01 to make sure the main clip would fit properly.
Iterated the final design to slightly increase rotating element clearance.
Category: 3D Printer Accessories