iFixit FixHub Soldering Iron Portable Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact modular stand that clips onto the iron for travel
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 125
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I thought this iron deserved a stand that is just as portable and minimal as the device itself. The stand is 3 pieces that can be assembled in 2 ways: desktop mode, and a compact arrangement for storage or travel.
Make sure you orient the pieces correctly, as seen in one of the images above (or use the 3MF file):
One half of the base needs to be flipped (the mouse ears should make that obvious)
The arm piece with the "button" on it has one flattened side to print on
I added mouse ears just in case, they should pop off very easily. No other supports are needed.
Tolerances are hardcoded at 0.1mm, which works perfectly on my Mk4 with 0.2mm height with fast print settings. It is designed to be stable enough even with a loose fit, so it should last a while. If it's too tight for you let me know, I can make the tolerance value parametric on request.
FreeCAD provided! (I tried to keep it fairly organized. 95% of the geometry for the base is in one Body, and then cloned and cut into two pieces using a master sketch for the joint, with a couple adjustments made on these two pieces.)
Some remix thoughts,
Mod the friction slots to use a compliant mechanism and a snap-fit clip
Add the indent for the iFixit storage box for wool / sponges
Cheers to iFixit for making various 3D models, and a basic stand, available on here to make this super easy!