100x135x105 3C Bin with Latching Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3C bin which is 100x135x105mm in outside dimensions. It is based on my Gridfinity Latching Bins v1.0, but doe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
This is a 3 compartment (3C) bin which is 100x135x105mm in outside dimensions. It is based on my Gridfinity Latching Bins v1.0, but does not use the Gridfinity system. I recommend using PLA or PETG. You can mix materials on the lids and latches, which also works well. The supports are integrated with the design, so no need for them.
This design is being posted without test printing, so if you make one, please post a make. It is a small modification from my existing and fully tested designs though, so I expect no issues when printing it.
You can find my similar Gridfinity Bins with latching lids over on MakerWorld or Printables, by following the links below. My latest designs will be found on MakerWorld:
https://makerworld.com/en/collections/844576-my-gridfinity-stuff
https://www.printables.com/@MyStoopidStuff/collections/1314851
If you find these models useful, please post a like or a comment with some pics of your prints.
You can find the other things I'm working on at my blog here. You can also follow me on Printables or on MakerWorld, to find out about the new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:
https://www.buymeacoffee.com/mystoopidstuff
Thanks for looking!
Changelog:
1/28/2026: Uploaded to Printables.