Unika's Folding crossbow like mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Crossbow like mechanism to replicate the arms from Unika's weapon in GG Strive
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
A Crossbow like mechanism to replicate the arms from Unika's weapon in GG Strive.
This was made with smaller printers in mind, this is version 3 but the others were too big.
When making this model, there is very few things that are needed for it but you need 6x2 magnets. glue it in. The model has how many parts on the model its self.
There is more parts here but are not needed to make the base model. Find it here -
When i made it, I used PLA and have had little to no problems but I will try PETG for the pins and clips when i get the chance.