1 / 3
Prusabeat Headband slotted for Steel Series Arctis 7 Band
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusabeat Headbands with slots to add a fabric band through. In my case, from a Steel Series Arctis 7
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just added some slots onto the headband. I did this in the slicer with a negative volume. I have no 3d modeling experience but I figured this might save someone else some time if they want to use a band with their Prusabeats. It's been holding up so far with no issues using Inland's PETG+.
Printed it at
.20 STRUCTURAL
15% Cubic Infill
No supports needed just like the original.