Scx10 ii Transmission and Motor Flip Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flip your 10 ii kit transmission and motor forwards for the best cg! The motor flip mount fits a good range of…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 1317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Flip your 10 ii kit transmission and motor forwards for the best cg!
The motor flip mount fits a good range of pinions, 10-14 at least, maybe a bit lower and higher.
The motor mount is pretty solid as long as you print it pretty thick, 5+ walls, I've had good luck with pla and petg, but I expect abs would be best.
The transmission flip mounts are not as strong, they work but they do break on me occasionally, but I have been driving the truck pretty hard to test these parts. They are designed for the stock chassis but might work with a custom chassis.
The battery mount only fits the stock skid, not a flat high clearance one, but it works great with smaller batteries to get your weight low.
If your converting a stock chassis you will need to dremel/cut the receiver box off the slider to make room for the transmission.
If your using a stock chassis check out my servo and servo winch mount! https://www.thingiverse.com/thing:4402458
If you have an original style trans check out my flip mount here! https://www.thingiverse.com/thing:4402550
Category: R/C Vehicles
