Slim minimalist wallet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very slim minimalist wallet. With an expanding design, it can accommodate 1-9 cards, or even more with some caveats.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slim, minimalist wallet which solves the two main issues I found with several of the minimalist wallets I tried before:
They were either designed with a specific number of cards in mind (or one had to print variations every time one needed to add or remove cards), or
That they relied heavily on the elastic rubber bands as the barrier to prevent the cards from sliding from some of the sides. This made the rubber bands rub against the cards, making it hard to grab cards out or put them back in and making it necessary to frequently replace the rubber bands.
Print two of the model with the face down. If you have a print bed with a pattern, you can use that to give it some flair. Do not apply mirroring to either part! Face the two sides against each other and use one or two elastic, rubber, or hair bands to hold them together.
I have tested this with 1 to 9 cards, and the tabs at the bottom and side will hold the cards and prevent the bands from interfering with using the cards. Although I don't recommend it, it is possible to use with more cards, but at that point one is relying on the strength of the bands to prevent the cards in the middle from sliding out. If you use more than 5 cards, I'd recommend using at least two bands. Personally, I've found 2-6 cards to be ideal.
FreeCAD file included for ease of customization/remixing.