a trip to the moon hueforge

a trip to the moon hueforge

3D Print Instructions

---------------------

Layer height: 0.120 mm

First layer height: 4.000 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #080808

Color swap plan:

1. Start with #080808

2. Swap to #0f0f0f at layer 1 (~4.000 mm)

3. Swap to #171717 at layer 3 (~4.120 mm)

4. Swap to #1f1f1f at layer 4 (~4.240 mm)

5. Swap to #262626 at layer 5 (~4.360 mm)

6. Swap to #2e2e2e at layer 6 (~4.480 mm)

7. Swap to #363636 at layer 7 (~4.600 mm)

8. Swap to #3d3d3d at layer 8 (~4.720 mm)

9. Swap to #454545 at layer 9 (~4.840 mm)

10. Swap to #4d4d4d at layer 10 (~4.960 mm)

11. Swap to #545454 at layer 11 (~5.080 mm)

12. Swap to #5c5c5c at layer 12 (~5.200 mm)

13. Swap to #636363 at layer 13 (~5.320 mm)

14. Swap to #6b6b6b at layer 14 (~5.440 mm)

15. Swap to #737373 at layer 15 (~5.560 mm)

16. Swap to #7a7a7a at layer 16 (~5.680 mm)

17. Swap to #808080 at layer 17 (~5.800 mm)

18. Swap to #878787 at layer 18 (~5.920 mm)

19. Swap to #8f8f8f at layer 19 (~6.040 mm)

20. Swap to #969696 at layer 20 (~6.160 mm)

21. Swap to #9e9e9e at layer 21 (~6.280 mm)

22. Swap to #a6a6a6 at layer 22 (~6.400 mm)

23. Swap to #adadad at layer 23 (~6.520 mm)

24. Swap to #b5b5b5 at layer 24 (~6.640 mm)

25. Swap to #bdbdbd at layer 25 (~6.760 mm)

26. Swap to #c4c4c4 at layer 26 (~6.880 mm)

27. Swap to #cccccc at layer 27 (~7.000 mm)

28. Swap to #d4d4d4 at layer 28 (~7.120 mm)

29. Swap to #dbdbdb at layer 29 (~7.240 mm)

30. Swap to #e3e3e3 at layer 30 (~7.360 mm)

31. Swap to #ebebeb at layer 31 (~7.480 mm)

32. Swap to #f2f2f2 at layer 32 (~7.600 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad