Heart Bookmark – HueForge Multicolor Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heart-themed bookmark created with HueForge.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 16
- Wydruki
- 2
- Wyświetlenia
- 85
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A clean and elegant heart-themed bookmark created with HueForge from an original image design.
Perfect as a small gift, Valentine’s bookmark, or decorative book accessory.
The model is provided as a ready-to-print 3MF file and a HueForge project file for further tweaking.
Model size: 51.77 × 150 mm
Actual thickness: 1.44 mm
Printing Settings (recommended):
Infill: 100%
Layer height: 0.08 mm
Base layer: 0.16 mm
You may print at higher layer heights below the base thickness of 0.24 mm
Filaments (4 colors):
PLA (Geetech) Black (Transmission Distance: 0.3)
PLA (Geetech) Red (Transmission Distance: 4.2)
PLA (Prusament Prusa) Orange (Transmission Distance: 6.6)
PLA (BambuLab Basic) White (Transmission Distance: 5,9)
Color Swap Instructions:
Start with Black
Layer #4 (0.40 mm) → Red
Layer #9 (0.80 mm) → Orange
Layer #12 (1.04 mm) → White (until end)
Notes:
Designed for flat printing on the build plate
No supports needed