Adjustable Projector Mount for Optoma GT1080
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The is a 3 point adjustable mount for the Optoma GT1080.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 1464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
The is a 3 point adjustable mount for the Optoma GT1080.
http://www.optomausa.com/projectorproduct/gt1080
The projector has such a short throw that it's great for setting on my bed and watching movies on the wall. However, the projector needs to be elevated a bit more to allow it to get sufficient cooling, and the leveling needs more adjustability to stay level on a squishy mattress.
In addition to the printed parts, you'll need
3x M4 x ~16mm cap screws,
3x 5/16-18 x 1.25" hex head screws
3x 5/16-18 nuts
a soldering iron
To assemble the feet, press the hex head into the foot and the tap it in with a hammer.
To assemble the nuts to the base, press the nuts into the hex holes with a soldering iron on high heat. It will melt the plastic a bit and seat into the hole. Don't burn yourself, breathe the fumes, or burn your house down.