Conch - now here to hold your cards!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is Conch from Mobile Suit Gundam GQuuuuuuX, who is happy to hold and transport your gundam TCG cards!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is my version of Conch from Mobile Suit Gundam GQuuuuuuX, with the capability of holding your Gundam TCG cards, dice, and more!
It has been designed to hold double sleeved cards (using dragon outer sleeves), with a section for both the main deck and resources/token cards. And is meant to be used in conjection with my previous diceholder organiser found here.
There is a bit of assmebly invovled, which is mostly straight forward. The materials you will require after printing all the components are:
Super glue
4x 20mm diameter, 2.5mm neodymium magnets (optional but keeps it more secure)
0.8mm thick felt self-adhesive sheets (optional but highly recommended to prevent the sound of 3DP parts scraping against each other)
On the inside of the inner frame and lid parts, there is a hex hole for the magnets. Make sure your polarities are correct before applying any glue!
For placing the felt sheets, please refer to the images.