Anycubic Kobra 3 Bowden tubes guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the Anycubic design for the tube guide, made specifically as replacement that was meant to similiar to original
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Because original part broke into the pieces, I've measured the renemants and made the replacement part that is supposed to look similiar to the original. As the bowden tube clamp was in good shape i reused it.
Model was made for my specific Kobra 3 and for eSUN black PETG on custom print settings.
Generally it should fit in any kobra 3, but bear in that there might be differences in dimmensions due to:
-differences in material properties
-differences in printer settings and hardware ( personally i have found that my kobra has up to 0.35mm dimmensional change when compared with my friend's H2D )
But if that happens it should be easy solvable with scaling or extrusion in the joint part.